Care and Cleaning
Markerboard care and cleaning
ERASABLE MARKERBOARD INSTRUCTIONS
GENERAL CARE AND CLEANING
Completely erase your board after each day's use. The longer marks remain on the board, the more difficult they become to erase. Stubborn, old marks can be erased by marking over them with your black erasable marker. For general cleaning, simply wipe your board clean with a soft wet cloth. If further cleaning is necessary, use Markerboard Cleaner per the package instructions.
ERASABLE MARKERS
The erasable marker has a solvent base that dries quickly. This is the key to erasibility. As a result, the markers should be kept tightly capped when not in use. If the cap is left off, the marker tip will go dry. If this happens it may be possible to rewet the tip. Cap your marker, turn it tip-down and shake vigorously for 20 seconds. Also, you may store the marker tip-down overnight. The erasable marker is designed specifically to mark on Erasable Markerboards. It is not recommended for use on other surfaces.
Chalkboard Care and Cleaning:
IMPORTANT - READ THE FOLLOWING INSTRUCTIONS PRIOR TO USING YOUR NEW CHALKBOARD. ALL CHALKBOARDS CAN BE WRITTEN ON AND ERASED MORE EASILY AFTER THEY HAVE BEEN IN USE FOR A PERIOD OF TIME. FOR BEST RESULTS, IT IS ESSENTIAL TO "BREAK IN" THE CHALKBOARD PRIOR TO WRITING ON IT AND TO USE ONLY QUALITY WHITE CHALK THAT CONTAINS AT LEAST 90% PURE CALCIUM CARBONATE. MOLDED AND COLORED CHALK OFTEN CONTAINS FOREIGN MATTER THAT CAN PERMANENTLY DAMAGE YOUR CHALKBOARD'S SURFACE.
"BREAKING IN" THE CHALKBOARD:
1. CHALK THE ENTIRE SURFACE, USING THE SIDE OF A PIECE OF PURE WHITE DUSTLESS CHALK. BE SURE TO SELECT ONLY WHITE CHALK THAT CONTAINS AT LEAST 90% PURE CALCIUM CARBONATE. AVOID CHALK WITH A GLAZED SURFACE.
2. WORK THE CHALK INTO THE SURFACE, USING AN ALL FELT ERASER.
3. REPEAT STEPS 1 AND 2.
4. CLEAN THE BOARD WITH A DRY CHAMOIS OR A SOFT LINT-FREE CLOTH.
CLEANING:
EXPERIENCE AND TESTING HAVE PROVEN THAT DRY CLEANING IS THE BEST AND EASIEST METHOD FOR CLEANING ALL TYPES OF CHALKBOARDS. SIMPLY ERASE THE ENTIRE SURFACE WITH A CLEAN FELT ERASER AND THEN WIPE WITH A SOFT, LINT-FREE CLOTH OR A DRY CHAMOIS.
WASHING:
TO REMOVE FOREIGN MATTER SUCH AS STAINS, HAIR OIL, FINGERPRINTS, CRAYON, PENCIL MARKS, ETC., IT MAY BE DESIRABLE TO WASH THE BOARD WITH WATER. A MILD HOUSEHOLD CLEANER MAY BE USED ON STUBBORN STAINS. AVOID THE USE OF STRONG CLEANERS CONTAINING OIL, SODA, KEROSENE, OR HARSH ABRASIVES. BE SURE TO DRY THE CHALKBOARD IMMEDIATELY SO THAT CHALK DUST WILL NOT DRY ON THE SURFACE, PRODUCING A GRAY FILM OR A SMEARY CONDITION. WATER ITSELF WILL NOT HARM THE CHALKBOARD. HOWEVER, THE COMBINATION OF WATER AND CHALK RESIDUE ON THE SURFACE CAN CREATE PROBLEMS. WHEN THE CHALKBOARD IS WASHED, THE WATER COMBINES WITH CHALK BINDER PARTICLES TO FORM A SUBSTANCE THAT PRODUCES A WHITE FILM OR GLAZE ON THE SURFACE. THIS MAY RESULT IN A SLICK GLOSSY SURFACE UNFIT FOR WRITING. THIS CONDITION CAN DEVELOP ON ANY TYPE OF CHALKBOARD FROM ANY MANUFACTURER, AS IT IS THE RESULT OF THE COMBINATION OF CHALK BINDER PARTICLES AND WATER. IT IS NOT RELATED TO THE TYPE OF SURFACE. WHEN COMPLETELY DRY, THE CHALKBOARD MUST BE BROKEN IN AGAIN. FOLLOW THE "BREAK IN" INSTRUCTIONS ABOVE. BECAUSE SUFFICIENT THOROUGHNESS MAY NOT BE EXERCISED, AND BECAUSE IT IS TIME CONSUMING, WET CLEANING SHOULD BE PERFORMED ONLY WHEN ABSOLUTELY NECESSARY. FOR BEST RESULTS. DRY CLEAN THE CHALKBOARD.
ERASABLE MARKERBOARD INSTRUCTIONS
GENERAL CARE AND CLEANING
Completely erase your board after each day's use. The longer marks remain on the board, the more difficult they become to erase. Stubborn, old marks can be erased by marking over them with your black erasable marker. For general cleaning, simply wipe your board clean with a soft wet cloth. If further cleaning is necessary, use Markerboard Cleaner per the package instructions.
ERASABLE MARKERS
The erasable marker has a solvent base that dries quickly. This is the key to erasibility. As a result, the markers should be kept tightly capped when not in use. If the cap is left off, the marker tip will go dry. If this happens it may be possible to rewet the tip. Cap your marker, turn it tip-down and shake vigorously for 20 seconds. Also, you may store the marker tip-down overnight. The erasable marker is designed specifically to mark on Erasable Markerboards. It is not recommended for use on other surfaces.
Chalkboard Care and Cleaning:
IMPORTANT - READ THE FOLLOWING INSTRUCTIONS PRIOR TO USING YOUR NEW CHALKBOARD. ALL CHALKBOARDS CAN BE WRITTEN ON AND ERASED MORE EASILY AFTER THEY HAVE BEEN IN USE FOR A PERIOD OF TIME. FOR BEST RESULTS, IT IS ESSENTIAL TO "BREAK IN" THE CHALKBOARD PRIOR TO WRITING ON IT AND TO USE ONLY QUALITY WHITE CHALK THAT CONTAINS AT LEAST 90% PURE CALCIUM CARBONATE. MOLDED AND COLORED CHALK OFTEN CONTAINS FOREIGN MATTER THAT CAN PERMANENTLY DAMAGE YOUR CHALKBOARD'S SURFACE.
"BREAKING IN" THE CHALKBOARD:
1. CHALK THE ENTIRE SURFACE, USING THE SIDE OF A PIECE OF PURE WHITE DUSTLESS CHALK. BE SURE TO SELECT ONLY WHITE CHALK THAT CONTAINS AT LEAST 90% PURE CALCIUM CARBONATE. AVOID CHALK WITH A GLAZED SURFACE.
2. WORK THE CHALK INTO THE SURFACE, USING AN ALL FELT ERASER.
3. REPEAT STEPS 1 AND 2.
4. CLEAN THE BOARD WITH A DRY CHAMOIS OR A SOFT LINT-FREE CLOTH.
CLEANING:
EXPERIENCE AND TESTING HAVE PROVEN THAT DRY CLEANING IS THE BEST AND EASIEST METHOD FOR CLEANING ALL TYPES OF CHALKBOARDS. SIMPLY ERASE THE ENTIRE SURFACE WITH A CLEAN FELT ERASER AND THEN WIPE WITH A SOFT, LINT-FREE CLOTH OR A DRY CHAMOIS.
WASHING:
TO REMOVE FOREIGN MATTER SUCH AS STAINS, HAIR OIL, FINGERPRINTS, CRAYON, PENCIL MARKS, ETC., IT MAY BE DESIRABLE TO WASH THE BOARD WITH WATER. A MILD HOUSEHOLD CLEANER MAY BE USED ON STUBBORN STAINS. AVOID THE USE OF STRONG CLEANERS CONTAINING OIL, SODA, KEROSENE, OR HARSH ABRASIVES. BE SURE TO DRY THE CHALKBOARD IMMEDIATELY SO THAT CHALK DUST WILL NOT DRY ON THE SURFACE, PRODUCING A GRAY FILM OR A SMEARY CONDITION. WATER ITSELF WILL NOT HARM THE CHALKBOARD. HOWEVER, THE COMBINATION OF WATER AND CHALK RESIDUE ON THE SURFACE CAN CREATE PROBLEMS. WHEN THE CHALKBOARD IS WASHED, THE WATER COMBINES WITH CHALK BINDER PARTICLES TO FORM A SUBSTANCE THAT PRODUCES A WHITE FILM OR GLAZE ON THE SURFACE. THIS MAY RESULT IN A SLICK GLOSSY SURFACE UNFIT FOR WRITING. THIS CONDITION CAN DEVELOP ON ANY TYPE OF CHALKBOARD FROM ANY MANUFACTURER, AS IT IS THE RESULT OF THE COMBINATION OF CHALK BINDER PARTICLES AND WATER. IT IS NOT RELATED TO THE TYPE OF SURFACE. WHEN COMPLETELY DRY, THE CHALKBOARD MUST BE BROKEN IN AGAIN. FOLLOW THE "BREAK IN" INSTRUCTIONS ABOVE. BECAUSE SUFFICIENT THOROUGHNESS MAY NOT BE EXERCISED, AND BECAUSE IT IS TIME CONSUMING, WET CLEANING SHOULD BE PERFORMED ONLY WHEN ABSOLUTELY NECESSARY. FOR BEST RESULTS. DRY CLEAN THE CHALKBOARD.
- Dry Erase Boards
- dry erase lap boards
- Reversible Marker Boards: Roll Around Markerboards
- Dry Erase Calendar Boards & Dry Erase Planning Boards
- Custom Dry Erase Boards, Custom Magnetic Marker Boards, custom white boards
- Dry Erase Sliding Panels, Horizontal Sliding Dry Erase Boards
- Dry Erase Menu Boards
- Easels
- Chalkboards
- Cork Boards, Cork Board, Natural Cork Bulletin Boards
- Cork Boards:Fabric Bulletin Boards, Vinyl Tackboards
- Unframed - No Frame - Boards
- Magnetic Sheets
- Combination Boards
- Conference Room Cabinets
- Letterboards & Directory Boards
- Letterboards Open Face
- Director Sign All Weather
- Message Boards and Pedestals
- Map Rails
- Accessories
- Catalog
- Resources
